3.12-200ng/ml

1.18ng/ml

<10%

<12%

*152285A: Microtiter Strips, 1x96 wells, Pre-coated, ready to use *152285B: Standard, 2x1 vial 152285C: Standard Diluent, 1x20ml *152285D: Detection Reagent A (green), 1x120ul 152285F: Assay Diluent A, 1x12ml 152285H: TMB Substrate, 1x9ml *152285J: Positive Control, 68.2ng/ml, 1x1vial (Lyophilized) 152285K: Stop Solution, 1x6ml 152285L: Wash Buffer, 30X, 1x20ml

The Stop Solution (152285K) included for use in this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material.

Store *152285A, *152285B, *152285D and *152285J at -20°C. After reconstitution of *152285J, store at 4°C and use within 5 days. Store all the other components at 4°C. Unused kit is stable for 6 months after receipt. Once kit components are opened, it is highly recommended to use remaining reagents within 1 month provided this is within the expiration date of the kit. For maximum recovery of product, centrifuge the original vials after thawing and prior to removing the cap.

Notes on 152285J: Positive Control

The positive control is from a human serum sample known to contain the target protein. It will provide a positive result in the ELISA assay, which indicates that the kit is optimized and working properly.

The positive control vial contains human anti-MBP in human serum (lyophilized powder). Note: The human based material used in this product is screened for HIV, Hepatitis A, B, C, HTLV and Syphilis.

68.2ng/ml

Dissolve with 150ul standard diluent and let stand for 10 minutes. If powder is partly insoluble, shake gently until fully dissolved. Mix gently before use. In the experiment, add 100ul to an appropriate well of the plate and test its concentration along with standards and your specimens. Note: Upon receipt store Positive Control vial at -20°C. After reconstitution, store Positive Control vial at 4°C and use within 5 days.

1. Prepare all reagents, samples and standards. 2. Add 100ul standard or sample to each well. Incubate 1 hour at 37°C. 3. Aspirate and add 100ul prepared Detection Reagent A. Incubate 1 hour at 37°C. 4. Aspirate and wash 5 times. 5. Add 90ul Substrate Solution. Incubate 10-20 minutes at 37°C. 6. Add 50ul Stop Solution. Read at 450nm immediately.